流水線：巴氏殺菌機,巴氏殺菌流水線既采用巴氏殺菌法，對各類包裝產品蔬菜、果蔬、鮮奶、罐裝食品通過溫度自動調節，將殺菌槽中的熱水溫度控制在80-90攝氏度之間，即能起到殺菌效果，又能保證蛋白質等營養成份不在較大溫度范圍內波動，保持食品原有的品質，達到對食品不加防腐劑和添加劑，而延長保質期，從而保護了人們的生命健康。同時對殺菌后的物品通過能卻水進行冷卻并用強風將包裝物表面吹干后包裝入庫可延長食品儲藏期。
Assembly line: pasteurization machine, pasteurization assembly line adopts pasteurization method to automatically adjust the temperature of various packaged products vegetables, fruits and vegetables, fresh milk, canned food, and control the temperature of hot water in the sterilization tank at 80- Between 90 degrees Celsius, it can not only achieve the sterilization effect, but also ensure that the nutritional ingredients such as protein do not fluctuate within a large temperature range, maintain the original quality of the food, and achieve no preservatives and additives to the food, and extend the shelf life, thereby protecting To improve people’s lives and health. At the same time, the sterilized items are cooled by energizing water and the surface of the package is blown dry with strong wind, and then packaged and stored in the warehouse to extend the food storage period.
巴氏殺菌機,巴氏殺菌流水線結構組成：
Pasteurization machine, pasteurization line structure composition:
巴氏殺菌機有殺菌機及電控部分組成，通過電器控制實驗自動化連續式生產，分兩種規格形式：
The pasteurization machine is composed of a sterilization machine and an electronic control part. It is automatically and continuously produced through electrical control experiments. It is divided into two specifications:
1、標準控制型：采用蒸汽電磁閥與溫度傳感器聯動控制。
1. Standard control type: use steam solenoid valve and temperature sensor linkage control.
2、電腦全動控制型：采用電腦觸摸屏與PLC自動執行進行控制。
2. Computer control type: computer touch screen and PLC automatic execution control.
巴氏殺菌機,巴氏殺菌流水線產品優勢特點：
Advantages of pasteurization machine, pasteurization production line:
1、采用全優質SUS304不銹鋼制成設備安全、衛生。
1. The equipment is made of high-quality SUS304 stainless steel for safety and hygiene.
2、采用巴氏殺菌法能保持原有品質，保質期長。
2. Pasteurization can maintain the original quality and have a long shelf life.
3、采用自動溫控，變頻器調速，自動化流水線程度高，勞動強度低可選配電腦全自動控制系統。
3. It adopts automatic temperature control, frequency converter speed regulation, high degree of automatic assembly line, low labor intensity, and optional computer automatic control system.
4、設備使用，維護方便，外形美觀。
4. The equipment is easy to use, easy to maintain and beautiful in appearance.
巴氏殺菌機,巴氏殺菌流水線使用說明書：
Instructions for pasteurization machine, pasteurization assembly line:
1、接通電源，該設備為三相四線，其中一根雙色線為零線（請專業人員進行連接線作業，以防對設備造成損害）。
1. Turn on the power, the device is three-phase four-wire, and one of the two-color wires is the neutral wire (professionals are required to connect the wires to prevent damage to the device).
2、打開電源開關，設定溫度設定溫度過程為按SET，按右鍵調適需要調整的位數，按上下鍵設定具體的數值，設定好后在按一次SET鍵確認。
2. Turn on the power switch and set the temperature. The temperature setting process is to press SET, press the right button to adjust the number of digits to be adjusted, and press the up and down keys to set the specific value. After setting, press the SET button to confirm.
3、打開殺菌開關，設備開始升溫，溫度升到設定值后自動停止，在工作過程中溫度下降升溫自動工作。
3. When the sterilization switch is turned on, the equipment starts to heat up, and it stops automatically when the temperature rises to the set value. During the working process, the temperature drops and the temperature rises automatically.
4、溫度升到設定值后，打開網帶開始運行，進行殺菌。
4. After the temperature rises to the set value, turn on the mesh belt and start running for sterilization.
5、網帶運行速度用電器箱內部的變頻器進行調整，旋鈕順時針旋轉為提高速度，反之速度降低。
5. The running speed of the mesh belt is adjusted with the frequency converter inside the electrical box, the knob is turned clockwise to increase the speed, otherwise the speed is reduced.
巴氏殺菌機,巴氏殺菌流水線使用注意事項：
Precautions for use of pasteurization machine and pasteurization line:
1、每天工作結束后，應對設備進行清洗。
1. The equipment should be cleaned after work every day.
2、每月應檢查減速機油位及油質，必要時進行加油或換油作業所用油為32號汽機油。
2. The oil level and oil quality of the reducer should be checked every month. If necessary, the oil used for refueling or oil change operations is No. 32 steam engine oil.
3、設備移動及重新接線時，應確認電機的轉向，如反轉則將三相電中的兩相任意兩相倒換。
3. When the equipment is moved and re-wired, the rotation direction of the motor should be confirmed. If it is reversed, any two phases of the three-phase power should be switched.
4、電器系統非專業人員禁止開箱。
4. Non-professionals in the electrical system are prohibited from opening the box.
以上內容由溫嶺市華宇生產流水線制造廠整理提供。華宇生產流水線是一家專業生產、設計、安裝、調試、運輸、維護為一體的流水線設備企業。建廠27年來，憑著先進的現代化生產管理體系，產品不斷創新，制造出成套懸掛物件輸送線，各類皮帶式輸送線、涂裝線、板鏈線、整機線、清洗線、自動化組合裝配生產設備，倉儲等產品系列。產品廣泛應用于汽車、摩托車、電動自行車及配件、清洗機、汽油機、縫糿機、電機、儀器儀表、家用電器、電腦、彩電、空調器、電冰箱、洗衣機、炊具、節能機、化妝品、通信、交通、水泵、食品塑料制品等電子行業各種裝配生產,為企業生產提高效率，降低人力成本。熱忱歡迎新老客戶來廠參觀、洽談合作！
The above content is organized and provided by Wenling Huayu Production Line Manufacturing Plant. Huayu production line is a professional production, design, installation, commissioning, transportation and maintenance line equipment enterprise. Since the establishment of the factory 26 years ago, with the advanced modern production management system and continuous product innovation, a complete set of suspended object conveyor lines, various belt conveyor lines, coating lines, plate chain lines, complete machine lines, cleaning lines, and automated combinations have been manufactured Assemble production equipment, storage and other product series. Products are widely used in automobiles, motorcycles, electric bicycles and accessories, washing machines, gasoline engines, sewing machines, motors, instruments, household appliances, computers, color TVs, air conditioners, refrigerators, washing machines, cooking utensils, energy-saving machines, cosmetics, Various assembly and production of electronic industries such as communications, transportation, water pumps, food plastic products, etc., improve production efficiency and reduce labor costs for enterprises. Warmly welcome new and old customers to visit the factory and discuss cooperation!
